How does it work?
The science behind the report indicates that habitat conditions vary depending on two measurable factors: streamflow volume and the passage of time. The entire
methodology and the science used for selecting the reference fish community, determining each species life cycle stages (bioperiods) and habitat conditions, and ultimately the setting of optimal streamflow thresholds and continuous days duration below thresholds within the bioperiods is statistically based but too lengthy to discuss here. However, it is interesting and you are encouraged to explore it in
depth by clicking on the link above.
The "Signal" of the meter on any given day will be either Green, Yellow, Red or N/A signifying either Normal, Dangerous, or Catastrophic habitat conditions on the river. An N/A indicates data was Not Available that day. The report states that Green signals represent typical habitat conditions. Yellow signals represent stressful (persistent) habitat conditions and voluntary steps to conserve water
should be undertaken by the Watershed community. Life threatening (catastrophic) habitat conditions occur under Red conditions and mandatory water conservation measures are recommended.
The meter also displays a "Level" indicator that is, under normal operating conditions, either Blank, 1, 2 or 3. The Level is indicative of habitat conditions relative to streamflow thresholds that occur in the common course of annual cycles (Level 1), of more restrictive habitat conditions as determined by low streamflow thresholds (Level 2), or of seriously low streamflows that dramatically impact habitat (Level 3). If the Level is Blank it indicates that streamflow volume is above the highest threshold set at Level 1. In situations where the Signal indicator is N/A, the Level indicator may provide the reason for the lack of data. "Ice" indicates the streamflow guage was not providing data due to ice buildup in the river. "Equ" represents a malfunction in the monitoring equipment. "BPU", for Bioperiod Parameters Undefined, indicates the Mesohabsim threshold parameters are not defined for this bioperiod. In the case of the PRWC, the Spring Flood bioperiod threshold parameters, from March 1st through April 30th, were not completed in the Mesohabsim study.
In combination, Red Level 2 & 3 conditons drastically diminish habitat and should not occur more often than once every decade.
Logic / Computations
Each Level has an associated days duration counter, or "clock" as the scientists like to call them, as well as three threshold parameters that vary depending on which Bioperiod for fish fauna is currently in effect: a Base Flow threshold, a Persistent Days Duration threshold and a Catastrophic Days Duration threshold. The clock keeps a tally of the number of consecutive days the USGS dishcharge flow guage has been below the Base Flow threshold for a given Level. The method by which the program calculates the days duration counter (clock count) and determines the color status for each of the three Levels follows:
1) On the transition day to a new bioperiod the clocks are reset to zero and all all three threshold parameters are set to those for the new bioperiod.
2) Each day the actual discharge flow is compared to the flow threshold.
3) If the discharge flow is below the flow threshold the clock is incremented by one.
4) It takes two consecutive days of flows at or above the flow threshold to reset the clock to zero. On the first such day the clock count is divided in half.
5) The clock count is compared to the days duration thresholds. If it is equal to or greater than the catastrophic days duration threshold a red status is assigned to the Level. If it is equal to or greater than the persistent days duration threshold a yellow status is assigned. Any lesser value assigns a green status.
The process by which the Habitat Meter simplifies the ACTogram summary to one color-coded signal is by scanning each Level and color status for the worst-case habitat condition. The hierarchical ranking system uses the color as the primary element and the Level as the secondary element. From worst to best are: red, yellow, green and Level 3, Level 2 and Level 1 respectively.
Bioperiod transitions present a unique situation for the Habitat Meter. Since the clocks reset to zero, the Habitat Meter will continue to signal the ACT color status from the last day of the prior bioperiod (termed Prior Bioperiod Overlap or PBO) as long as the prior bioperiod's ACT color status is worse than the current bioperiod's status and the current daily discharge flow remains below the flow threshold for the current bioperiod; in essence, until a significant precipitation event validates the current clock count. When either of these conditions is negated the current bioperiod ACT clock and color status are activated.
|
